Except there will be a period of time when many 'network elements' (routers, firewalls, servers (web, SMTP, DNS, etc), clients) will not be updated for the new protocol so you may also need 3B.

And this will be true for any IPng, and not just the one that just happened to be chosen to be for "IPv6" (which was SIPP, over CATNIP and TUBA; see RFC 1752).

> Let me keep my old address on the new protocol.

You can/could. You can encourage people who have addresses in the older protocol to use the new one with "free" "automatic" address assignments in the new one to encourage translation and tunnelling:

> For any 32-bit global IPv4 address that is assigned to a host, a 48-bit 6to4 IPv6 prefix can be constructed for use by that host (and if applicable the network behind it) by appending the IPv4 address to 2002::/16.

> For example, the global IPv4 address 192.0.2.4 has the corresponding 6to4 prefix 2002:c000:0204::/48. This gives a prefix length of 48 bits, which leaves room for a 16-bit subnet field and 64 bit host addresses within the subnets.

* https://en.wikipedia.org/wiki/6to4

And the 'old' IPv4 addresses are available in the new IPv6 world:

> Addresses in this group consist of an 80-bit prefix of zeros, the next 16 bits are ones, and the remaining, least-significant 32 bits contain the IPv4 address. For example, ::ffff:192.0.2.128 represents the IPv4 address 192.0.2.128. A previous format, called "IPv4-compatible IPv6 address", was ::192.0.2.128; however, this method is deprecated.[5]

* https://en.wikipedia.org/wiki/IPv6#IPv4-mapped_IPv6_addresse...

There is no way around this limitation: you must have a separate network space because of physical limitations.

Your supposed solution, and many others, have been thought of already. Have been tried. You are not thinking of anything new in your proposal.